Garbage Disposals Error Code No Sound

WarningDIY fixable
Last updated: 2026-02-24

Error code No Sound on a garbage disposals is a warning-level fault. Common causes include Overload protector tripped from jamming, Tripped circuit breaker or GFCI outlet, Faulty wall switch or wiring, Burned-out motor from prolonged jam. This can typically be resolved without professional help by checking each potential cause systematically.

A warning-level error on a garbage disposals indicates a problem that may affect performance but hasn't caused a complete shutdown. The appliance may still operate in a limited capacity, but the underlying issue should be resolved to prevent further problems.

Common Causes

  • Overload protector tripped from jamming
  • Tripped circuit breaker or GFCI outlet
  • Faulty wall switch or wiring
  • Burned-out motor from prolonged jam

Can I fix this myself?

Yes. This error can typically be resolved by checking the common causes listed above. Start with the simplest fix first and work down the list.

What to Do Next

1
Try the troubleshooting guide

Step-by-step diagnosis for common garbage disposals problems

2
Check the maintenance schedule

Preventive maintenance can resolve and prevent many error codes

3
Contact a professional

If the error persists after troubleshooting, a qualified technician can diagnose the specific component failure

Other Garbage Disposals Error Codes

Common Questions

How do I clear error code No Sound on my garbage disposals?

First, address the underlying cause — overload protector tripped from jamming. Once the issue is resolved, try power cycling the appliance: unplug it for 60 seconds, then plug it back in. Many garbage disposals will clear the error code after a successful restart. If the code reappears, the root cause hasn't been fully resolved.

Is error code No Sound dangerous?

Error code No Sound is a warning-level issue. It's not immediately dangerous, but it indicates a problem that should be addressed to prevent potential damage or reduced performance. Your garbage disposals may continue to operate in a limited mode.

How much does it cost to fix error code No Sound?

If the cause is overload protector tripped from jamming, a DIY fix may cost nothing beyond your time. If parts are needed, typical garbage disposals replacement parts range from $20 to $200 depending on the component. A professional service call typically costs $100-250 for diagnosis plus parts and labor.

Need structured error code data in your app?

Access this data programmatically via the Covala API.