Summit Refrigerators Error Codes

13 error codes extracted from Summit refrigerators service manuals. Each code includes its meaning and a summary fix step.

Error Codes13 codes

FAIL

A button is found to be working abnormally (being activated without being manually pressed).

Press STOP/CANCEL to clear the display and stop the alarm. Contact a qualified technician if the problem persists.

E-7

Smoke concentration inside the microwave oven exceeds the limit value of the alarm.

Press STOP/RESET to stop the alarm and return to standby mode.

E-0

Smoke alarm sensor is working improperly.

Press STOP/CANCEL to stop the alarm and return to standby mode.

E0

Communication error for 3 zone models.

Call for service.

E1

Air temperature sensor has failed.

Call for service.

E2

Air temperature sensor has failed.

Call for service.

E3

Defrost sensor in the evaporator has failed.

Call for service.

E4

Defrost sensor in the evaporator has failed.

Call for service.

E5

Defrost heater failure.

Call for service.

E7

Door switch failure.

Call for service.

LCD displays blank square

Door Opening Alarm: A drawer has been left open for more than 5 minutes.

Press any key on the control panel, or close the door.

L

Low Temperature Alarm: Interior temperature is lower than 28°F (-2°C) for over 3 hours.

Press any key on the control panel to stop the beeping alarm.

H

High Temperature Alarm: Interior temperature is higher than 77°F (25°C) for over 6 hours.

Press any key on the control panel to stop the beeping alarm.

All Refrigerators Error CodesAll Summit Products

Need model-specific Summit error codes?

Access per-model error codes, part numbers, and detailed fix steps via the Covala API.