EMPAVA Cooktops Error Codes

15 error codes extracted from EMPAVA cooktops service manuals. Each code includes its meaning and a summary fix step.

Error Codes15 codes

U

No cookware found or improper placement of cookware on the cooking element.

Make sure that the cookware is centered on the cooking element, and that it is also induction compatible.

E0

IGBT (Insulated Gate Bipolar Transistor) overheating.

Turn off the cooktop to allow IGBT to cool. Restart unit.

E2

Supplied voltage to cooktop is too low.

If the voltage of the power supplied to the cooktop is too low, it cannot operate properly and will show this error code...

E3

Supplied voltage to cooktop is too high.

If the voltage of the power supplied to the cooktop is too high, it cannot operate properly and will show this error cod...

E4

NTC2 (To check the temperature of heating center) damaged.

Call for service.

E7

NTC1 (To check the temperature of IGBT) break off.

Turn OFF the cooktop; then shut off the power at the fuse of circuit breaker for about 30 seconds.

E8

NTC1 (To check the temperature of IGBT) short circuit.

Turn OFF the cooktop; then shut off the power at the fuse of circuit breaker for about 30 seconds.

E9

NTC2 (To check the temperature of heating center) break off.

Turn OFF the cooktop; then shut off the power at the fuse of circuit breaker for about 30 seconds.

EE

NTC2 (To check the temperature of heating center) short circuit.

Turn OFF the cooktop; then shut off the power at the fuse of circuit breaker for about 30 seconds.

F

The disruption of communication lines.

Call for service.

Pan detection symbol (pan with cross through it)

No cookware found or improper placement of cookware on the cooking element

Make sure that the cookware is centered on the cooking element, and that it is also induction compatible.

E

Electronics fault error message of specific cooking element

See E0, E1, E2, E3, E7, E8, E9, EE

E0-E9

Error code

E1

No cookware found or improper placement of cookware on the cooking element

Make sure that the cookware is centered on the cooking element, and that it is also induction compatible.

H

A cooking element is still hot to touch (residual heat)

Wait until the 'H' is no longer displayed to clean the unit. You may turn the Cooking Element back on even if the 'H' is...

All Cooktops Error CodesAll EMPAVA Products

Need model-specific EMPAVA error codes?

Access per-model error codes, part numbers, and detailed fix steps via the Covala API.